Onkyo HT-R340 User Manual

Remote Controller-Continued
To select your Cassette deck as the input source,
press:
CD Play [~] button
This button is used to start playback.
® Stop [.] button
This button is used to stop playback.
@ Reverse Play [ ..... ] button
This button is used to start reverse playback.
@ Rewind & FF [ ... ]I[~] buttons
The Rewind [ ... ] button is usedto start rewind. The
FF [~] button is used to start fast forward.
TAPE mode is used to control an Onkyo cassette
recorder connected to the
AV receiver via R I.
To
set the remote controller to TAPE mode, press the
[RECEIVER] REMOTE MODE button.
For twin cassette decks, only deck B can be controlled.
)} ::,...J:
'iILPUST!"
"'1"'1:/ f'\
~Jt-~
4
ONKYO
RC-648S
18

Onkyo HT-R340 Specifications

General

Channels	5.1
Audio Decoding	Dolby Digital, DTS
AM/FM Tuner	Yes
Speaker Impedance	6 Ohms
HDMI	Yes
HDMI Outputs	1
Analog Audio Inputs	4
Subwoofer Output	Yes
Bluetooth	No
Wi-Fi	No
Power Output	100W per channel
Inputs	HDMI, Composite Video, Digital Audio (Optical/Coaxial), Analog Audio
Outputs	HDMI, Composite Video, Analog Audio, Subwoofer Pre-out
Type	AV Receiver
Input Sensitivity	200 mV
Signal-to-Noise Ratio	100 dB
Dimensions	435 x 150 x 318 mm