Onkyo HT-R520

15
Remote Controller —Continued
M
FR & FF [ ]/[ ] buttons
The FR [ ] button is used to start fast reverse. The
FF [ ] button is used to start fast forward.
N
Stop [ ] button
This button is used to stop playback.
O
RANDOM button
This button is used with the random playback func-
tion.
P
MEMORY button
This button is used with the memory playback func-
tion, which allows you to create a custom playlist of
tracks.
Tape mode is used to control an Onkyo cassette recorder
connected to the HT-R520 via .
To set the remote controller to Tape mode, press the
[AMP] mode button.
For double cassette decks, only Deck B can be con-
trolled.
1 Play [ ] button
This button is used to start playback.
2
Previous & Next [ ]/[ ] buttons
The Previous [ ] button is used to select the pre-
vious track. During playback it selects the begin-
ning of the current track. The Next [ ] button is
used to select the next track.
The Previous and Next [ ]/[ ] buttons may not
work properly with some cassette tapes depending
on how they were recorded.
3
Reverse Play [ ] button
This button is used to start reverse playback.
4
REC [ ] button
This button is used to start recording.
5 VOL button
This button is used to set the volume of the
HT-R520.
6
MUTING button
This button is used to mute the HT-R520.
7 Rewind & FF [ ]/[ ] buttons
The Rewind [ ] button is used to start rewind. The
FF [ ] button is used to start fast forward.
8
Stop [ ] button
This button is used to stop playback.
The remote controller has dedicated buttons for control-
ling a TV, which can be used regardless of which remote
controller mode is currently selected. To use these but-
tons, you must first program the [TV] mode button with
the appropriate remote control code for your TV (see
page 50).
Tape Mode
Before selecting TAPE mode and starting play-
back, you should press the [AMP] mode button
followed by the [TAPE] input selector button to
select your cassette recorder as the input
TV Control Buttons
TV [ ]
Set the TV to On or Standby
TV CH [+]/[–] Selects channels on the TV
[TV INPUT] Selects the TV’s VCR input
TV VOL [ ]/[ ]
Adjusts the TV’s volume
CD
+
10 0
CLEAR
123
456
789
V1 V2 V3
DVD MULTI CH
--/---
TAPE TUNER
INPUT
I
+
-
ENTER
S
E
T
U
P
G
U
I
D
E
R
E
T
U
R
N
E
X
I
T
T
O
P
M
E
N
U
M
E
N
U
VOL
+
-
CDR
SAT
AMP
+
_
TV VCR CABLE
DVD CD MD
DISC
CH
TONE
TUNER/
TAPE
DISPLAY
TV
INPUT
PREV
CH
DIMMER SLEEP
MUTING
ON STANDBY
T
V
TV CH
T
V VOL
REMOTE MODE
TV INPUT
TV
TV CH
I
TV VOL
TV
You must enter the
appropriate remote
control code (see
page 50)
HT-R520En.book Page 15 Monday, March 15, 2004 2:47 PM