Connect your components to the appropriate jacks. The default input assignments are shown below. See "Connection
Tips and Video Signal Path" for more information (_ page 79).
v': Assignment can be changed (_ page 43).
No.
[]
[]
[]
[]
Jack/Port
AUX INPUT ]AUDIO L/R
VIDEO
USB, AUX INPUT VIDEO*I
USW2
DIGITAL IN
[] COMPONENT
VIDEO
[] ETHERNET
[] MONITOR OUT
BD/DVD IN
VCR/DVR IN
CBL/SAT IN
GAME IN
TV/CD IN
OPTICAL
COAXIAL
IN 1 (BD/DVD)
IN 2 (CBL/SAT)
OUT
I (GAME)
2 (TV/CD)
1 (BD/DVD)
2 (CBL/SAT)
Components Assignable
Camcorder, etc
v'
v"
v"
v"
v"
v"
iPod/iPhone (video playback)
iPod/iPhone, MP3 player, USB flash drive
Game console
TV, CD player
Blu-ray Disc/DVD player
Satellite/cable set-top box, RI dock, etc.
Blu-ray Disc/DVD player, RI dock
Satellite/cable set-top box, RI dock, etc.
TV, projector, etc.
Router
TV, projector, etc.
Blu-ray Disc/DVD player
VCR or DVD recorder/digital video recorder, R[
dock
Satellite/cable set-top box, etc.
Game console, RI dock
TV, CD player, cassette tape deck, MD, CD-R,
Turntable*3, R[ dock
Personal computer
Universal port option dock (UP-AI etc.)
[] PC IN*4 _'
[] UNIVERSAL PORT
*1 When USB input is selected, you call input video signals fl'om the AUX INPUT VIDEO jack. Video signals input fl'om AUX
INPUT VIDEO will be output from the MONITOR OUT V jack.
*2 Do not connect the AV receiver' s USB port to a USB port on your computer. Music on your computer cannot be played through the
AV receiver in this way.
*3 Connect a turntable (MM) that has a phouo preamp built-in. If your turntable (MM) doesn't have it, you'll need a commercially
available phouo preamp.
If your turntable has a moving coil (MC) type cartridge, you'll need a commercially available MC head amp or MC transformer as
well as a phouo preamp. See your turutable's manual for details.
Ell
17
To Next Page
Loading...
Need help?
General
