10
2. Connect the HDMI AV Component
This is an example of connection with an AV component
that has an HDMI jack. With connection to an AV
component that conforms with the CEC (Consumer
Electronics Control) standard, you can use features such as
the HDMI CEC feature (*) that links with the input selector,
and the HDMI Standby Through feature which allows you to
play video and audio from AV components on the TV even
when this unit is in standby mode.
0
To play 4K or 1080p video, use a high speed HDMI cable.
(*)The HDMI CEC feature: You can control features such
as linking input switching with the input selector and
players conforming to the CEC standard, switching audio
to output it from the TV or from this unit, and adjusting
the volume using the remote controller of a CEC-
compliant TV, and automatically switching this unit to
standby when the TV is turned off.
Setup
0
When "Yes" is selected for "5. Audio Return
Channel" in Initial Setup (P16), the HDMI CEC
function and HDMI Standby Through function are
automatically enabled. If "No, Skip" is selected,
settings are required in the Setup menu after Initial
Setup is complete. Press on the remote controller
and make the settings in "5. Hardware" - "HDMI".
0 To enjoy digital surround sound including Dolby
Digital, audio output should be set to "Bitstream
output" on the connected Blu-ray Disc player or
other device.
SN29402830_HT-R997_BAS_En_1703XX.book 10 ページ ２０１７年３月１７日 金曜日 午前９時１８分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
