En-19
Turning On & Basic Operations
Turning On/Off the AV
Receiver
Tip
• For details on power management settings, see “Auto Standby”
(➔ page 49).
8ON/STANDBY
8
RECEIVER
Turning On
1
Press 8ON/STANDBY on the front panel.
or
Press RECEIVER followed by 8 on the remote
controller.
The AV receiver comes on, and its display lights.
Turning Off
1
Press 8ON/STANDBY on the front panel.
or
Press RECEIVER followed by 8 on the remote
controller.
The AV receiver will enter standby mode. To prevent
any loud surprises when you turn on the AV receiver,
always turn down the volume before you turn it off.
To Next Page
Loading...
Need help?
General
