Onkyo K-200R User Manual

Specifications
Track Format:
Erasing System:
Tape Speed:
Wow and Flutter:
Frequency Response:
S/N Ratio:
Input Jacks:
Outputs:
Motors:
Heads:
Power Supply Rating:
Power Consumption:
Dimensions:
Weight:
Supplied Accessories:
4-tracks, 2-channels
AC erase
4.8 cm/sec. (1-Ve i.p.s.)
0.06% (WRMS)
20—16,000Hz (Normal)
(80—15,000Hz + 3dB)
20—16,000Hz (High)
(30—15,000Hz + 3dB)
20—17,000Hz (Metal)
(80— 16,000Hz + 3dB)
58dB (metal tape, Dolby NR off)
Anoise reduction of 10dB above 5kHz
and 5dB at 1kHz is possible with Dolby B
NR. A noise reduction of 20dB at 5kHz is
possible with Dolby C NR.
Line IN: 2
Input sensitivity: 80mV
Input impedance: 50kohms
Line OUT: 2
Standard output level: 500mV (OdB)
Optimum load impedance: over
50 kohms
DC servo motor: 1
DC motor: 1
REC/PB: Special Hard Permalloy x 1;
Erase head: Ferrite x 1
European models:
AC 220V, 50Hz
U.K. and Australian models:
AC 240V, 50Hz
Worldwide models:
AC 120V and 220V switchable, 50/60Hz
25 watts
435(W) x 117(H) x 328(D)mm
(17-Vg" x 4-1V/49" x 12-1546")
5.7 kg. (12.6 ibs.)
Connecting cable x 2
Al remote control cable x 1
Specifications and external appearance are subject to change
without notice because of product improvements.
—~12—

Onkyo K-200R Specifications

General

Brand	Onkyo
Model	K-200R
Category	Tape Deck
Language	English