EasyManua.ls Logo

Onkyo M-5000R Service Manual

Onkyo M-5000R
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
M-5000R
SERVICE MANUAL
POWER AMPLIFIER
MODEL M-5000R(B/S)
AC 120 V, 60 Hz
AC 230 V, 50 Hz
AC 100 V, 50/60Hz
BMDC
BMPP
SMPP
SMJJ
Ref. No. 4255
1,2011
Black and Silver models
SAFETY-RELATED COMPONENT
WARNING!!
COMPONENTS IDENTIFIED BY MARK ON THE
SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE
CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK.
REPLACE THESE COMPONENTS WITH ONKYO
PARTS WHOSE PART NUMBERS APPEAR AS SHOWN
IN THIS MANUAL.
MAKE LEAKAGE-CURRENT OR RESISTANCE
MEASUREMENTS TO DETERMINE THAT EXPOSED
PARTS ARE ACCEPTABLY INSULATED FROM THE
SUPPLY CIRCUIT BEFORE RETURNING THE
APPLIANCE TO THE CUSTOMER.

Other manuals for Onkyo M-5000R

Question and Answer IconNeed help?

Do you have a question about the Onkyo M-5000R and is the answer not in the manual?

Onkyo M-5000R Specifications

General IconGeneral
Damping factor130
Amplifier class-
Frequency range1 - 250000 Hz
Input sensitivity700 mV
Audio output channels2.0 channels
Peak power per channel150 W
Signal-to-Noise Ratio (SNR)110 dB
Total Harmonic Distortion (THD)0.02 %
Dynamic power per channel (2 Ohm)320 W
Dynamic power per channel (3 Ohm)245 W
Dynamic power per channel (4 Ohm)196 W
Dynamic power per channel (6 Ohm)142 W
Dynamic power per channel (8 Ohm)110 W
RMS power output per channel (8 Ohm)80 W
XLR out1
Speakers connectivity typeRCA
PurposeHome
On/off switchYes
Product colorSilver
Cables includedAC
Connectivity technologyWired
AC input voltage230 V
AC input frequency50 Hz
Power consumption (typical)280 W
Package weight27000 g
Weight and Dimensions IconWeight and Dimensions
Depth432.5 mm
Width435 mm
Height187.5 mm
Weight23500 g

Summary

Service Procedures

1. Replacing the fuses

Details on replacing fuses for fire hazard protection.

2. Safety check out

Procedures for checking leakage current and insulation.

3. Adjustment of Meter

Steps to adjust the meter indicator to the zero line.

4. Safety Standard

Confirmation of 2mm or more crevice between components.

6. Screw of Cover

Order of installing screws to secure the cover.

7. Position of SP Terminals

Guidance on deburring and placement of speaker terminals.

Technical Diagrams and Views

Exploded Views

Visual breakdown of component assembly parts.

Schematic Diagrams

Electrical circuit diagrams of the amplifier sections.

Printed Circuit Board Views

Layout diagrams of the amplifier's printed circuit boards.

Parts Lists

Exploded View Parts List

Comprehensive list of parts identified in exploded views.

PC Board Parts List

List of parts specific to each printed circuit board assembly.

Packing Procedures Parts List

List of materials used for product packing and shipping.

Related product manuals