To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-DS484 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Frequency Response | 10 Hz - 100 kHz |
| Total Harmonic Distortion (THD) | 0.08% |
| Input Sensitivity | 200 mV |
| Signal to Noise Ratio | 100 dB |
| Analog Outputs | 2 x RCA |
| Tuning range | FM/AM |
| Surround Sound Formats | Dolby Digital, DTS |
| Surround Output | 75 W |
| Input Sensitivity/Impedance | 200 mV / 47 kΩ |
| Digital Inputs | 1 x coaxial |
| Analog Inputs | 5 x RCA |
| Video Connections | Composite |
| Video Inputs | 3 x composite |
| Video Outputs | 1 x composite |
| Signal-to-Noise Ratio | 100dB |
| Speaker Impedance | 8 ohms |
| Power Output (per channel) | 75 Watts (8 Ohms) |
| Dimensions | 17.1 x 5.5 x 15.2 in |
Recommended placement for front, center, and surround speakers for optimal sound.
Configure subwoofer presence and front speaker size (Large/Small).
Set the size (Large/Small/None) and distance for the center speaker.
Set the size (Large/Small/None) and distance for surround speakers.
Adjust distance parameters for front, center, and surround speakers.
Use test tones to balance speaker levels for optimal listening experience.
Select the desired audio/video source from connected devices.
Adjust individual speaker levels for multi-channel audio sources.
Choose from various surround sound modes for immersive audio.
Utilize Dolby Pro Logic for enhanced center channel and surround effects.
Reduce dynamic range for comfortable listening at low volumes at night.
Understand and use Dolby Digital and DTS surround sound formats.
Explore Onkyo's proprietary surround modes for specific audio types.
Specify input signal format (Auto, Digital, Analog) for various sources.
