To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR525 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Frequency range | 5 - 100000 Hz |
| Output impedance | 2200 Ω |
| Pre-out channels | 2 SW |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 5.2 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 1 % |
| Dynamic power per channel (3 Ohm) | 180 W |
| Dynamic power per channel (4 Ohm) | 160 W |
| Dynamic power per channel (8 Ohm) | 100 W |
| Power output per channel (1KHz@6 Ohm) | 130 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 6 |
| Composite video in | 5 |
| Digital audio optical in | 1 |
| Component video (YPbPr/YCbCr) in | 2 |
| Connectivity technology | Wired |
| Speakers connectivity type | RCA |
| Audio formats supported | AAC, FLAC, LPCM, MP3, OGG, WAV, WMA |
| Wi-Fi | No |
| RDS features | PS, PTY, RT, TP |
| AM band range | 522 - 1710 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | TuneIn, Last.fm, Spotify |
| Display | - |
| Product color | Black |
| Audio decoders | Dolby TrueHD, DTS-HD Master Audio |
| Volume control | Rotary |
| Center speaker impedance | 6 Ω |
| Apple docking compatibility | Not supported |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 400 W |
| Package weight | 11500 g |
Weight and Dimensions| Depth | 328 mm |
|---|---|
| Width | 435 mm |
| Height | 173.5 mm |
| Weight | 9000 g |
Essential safety guidelines to prevent hazards and ensure proper use.
Steps to connect the main AV receiver unit to various components.
Guide for connecting speaker systems to the AV receiver for surround sound.
How to connect TVs and other audio/video devices to the receiver.
Procedures for powering the AV receiver on and off, including standby mode.
Guide to automatically configuring speaker settings using the included microphone.
How to navigate and control media from USB drives or network sources.
How to tune into AM and FM radio stations and preset favorites.
How to select and use various sound processing modes for different audio sources.
Overview of changing settings via the TV screen using Quick Setup or Setup Menu.
Accessing and changing frequently used settings quickly.
Adjusting tone controls, phase matching bass, and speaker levels.
Information and settings related to Audyssey room correction and sound optimization.
Adjusting sound quality based on volume level using Audyssey Dynamic EQ.
Managing volume variations between programs and commercials using Audyssey Dynamic Volume.
Setting audio input priorities for HDMI, coaxial, optical, or analog sources.
Configuring HDMI Through, HDMI CEC (RIHD), Audio TV Out, Audio Return Ch, and LipSync.
Manual configuration of network settings like DHCP, IP Address, and DNS Server.
Solutions for common problems encountered with the AV receiver.
Detailed steps to enter remote control codes for other devices.
