To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR575E and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Frequency range | 10 - 10000 Hz |
| Output impedance | 2.3 Ω |
| Input sensitivity | 200 mV |
| 4Ω speaker support | Yes |
| Audio output channels | 5.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 160 W |
| Dynamic power per channel (4 Ohm) | 125 W |
| Dynamic power per channel (8 Ohm) | 85 W |
| Power output per channel (20-20KHz@8 Ohm) | 135 W |
| HDMI in | 4 |
| Digital audio coaxial in | 1 |
| Digital audio optical in | 2 |
| Display | - |
| HDCP version | 2.2 |
| Apple docking | No |
| Product color | Black |
| Audio decoders | DTS:X, Dolby Atmos |
| Damping factor | 49 |
| Bluetooth version | 4.1 |
| Speakers connectivity type | 3.5mm |
| Supported video modes | 480i, 480p |
| AM band range | 530 - 1.71 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | Deezer, Spotify, Tidal, TuneIn |
| Audio formats supported | AIFF, ALAC, FLAC, WAV |
| AC input voltage | 220 - 240 V |
| Power consumption (standby) | 0.15 W |
| Power consumption (typical) | 480 W |
| Package depth | 400 mm |
| Package width | 539 mm |
| Package height | 260 mm |
Weight and Dimensions| Depth | 328.5 mm |
|---|---|
| Width | 435 mm |
| Height | 173.5 mm |
| Weight | 9000 g |
Lists all items included in the product package.
Identifies and describes the front panel components of the AV receiver.
Explains the indicators and information shown on the unit's display.
Identifies and describes the rear panel connection jacks and terminals.
Identifies and describes the functions of the remote control buttons.
Outlines the steps for setting up the unit and connecting components.
Guides on selecting and positioning speakers for optimal sound.
Provides instructions for connecting speaker systems to the AV receiver.
Details connecting TVs and other AV components to the unit.
Guides initial setup through an on-screen wizard for basic configuration.
Explains the automatic room calibration for speaker setup and sound optimization.
Verifies that all input sources are correctly connected for proper operation.
Guides on connecting the unit to a network for internet radio and other features.
Configures audio output for a separate room (ZONE 2).
Enables TV audio to be sent back to the unit via HDMI.
How to play audio from connected AV components like Blu-ray players.
Instructions for wirelessly playing music from Bluetooth-enabled devices.
Explains how to enjoy internet radio, streaming, and wireless playback features.
Details how to play music files stored on a USB storage device.
Guides on tuning into and receiving AM and FM radio stations.
Explains how to enjoy audio in a separate room (ZONE 2).
Describes how to select and use various listening modes for different content.
