Onkyo TX-SR307 User Manual

FRONT
FRONT
SPEAKERS A
SPEAKERS A
FRONT
FRONT
SPEAKERS B
SPEAKERS B
SURR
SPEAKERS
SPEAKERS
CENTER
CENTER
SPEAKER
SPEAKER
Press the SPEAKERS [A] button on
the front panel. Make sure that speaker
indicator A is shown on the display.
Press the [RECEIVER] button, and then
press the remote controller’s [SP A/B]
button repeatedly to select speaker set A.
Make sure that speaker indicator A is
shown on the display.
Turn off speaker set B when not in use.
Indicator should be off.
5/8''
(15mm)
Speaker Set A Layout (Main Room)
Front
Left
Surround
Left
Surround
Right
Listener
TV
Sub woofer
Front
Right
Center
On the
front panel
On the
remote
controller
On the
display
BA
First of all, turn on speaker set A.
3/8''
(10mm)
Surround right
speaker
Surround left
speaker
Powered
subwoofer
Front left
speaker
Front right
speaker
Center
speaker
SN 29344928(C) Copyright 2009 ONKYO CORPORATION Japan. All rights reserved.
Speaker Set A Hookup
* 2 9 3 4 4 9 2 8 *
QUICK SETUP
Model : TX-SR307
Thank you for purchasing this product.
This quick setup sheet shows the typical hookup method for connecting
speakers and AV components (DVD/BD player, TV, cable/satellite receiver).
For more detailed hookup information and operating instructions,
please see the Instruction Manual.
See the other side of this sheet
for the AV component hookup.

Onkyo TX-SR307 Specifications

General

Channels	5.1
Power Output (per channel)	100 W
Total Harmonic Distortion	0.08%
Video Formats Supported	1080p
Weight	20.5 lbs
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	100 dB
Input Sensitivity	200 mV
Audio D/A Converter	192kHz/24-bit
Built-in Decoders	Dolby Digital, DTS
Tuner Bands	AM/FM
Preset Station Qty	40
HDMI	4 Inputs, 1 Output
Input/Output	4 HDMI
Audio Formats Supported	Dolby Digital
Dimensions	17.1 in x 12.9 in x 5.9 in
Input Impedance	47 kOhms
Surround Sound Effects	Dolby Pro Logic II
Connector Type	HDMI input
Video Inputs	4 HDMI, 2 component
Audio Inputs	4 Audio Inputs