Basic playback
4
4
23
2
31
4
Listening to station presets
You will need to have some presets stored to do this. See
Saving station presets
on page 22 if you haven’t done this
already.
…
Press
PRESET +/–
to select the station preset you
want.
Naming preset stations
For easier identification, you can name all of your preset
stations.
1
Choose the station preset you want to name.
See Listening to station presets above for how to do this.
2
Press
EDIT
twice.
The cursor at the first character position is blinking on
the display.
3
Input the name you want.
Choose a name up to eight characters long.
•
Use
PRESET +/–
to select character position.
•
Use
TUNING +/–
to select characters.
•
The name is stored when
ENTER
is pressed.
•
To erase a station name, follow steps 1 and 2, and press
ENTER
while the display is blank. Press
EDIT
while the
display is blank, to keep the previous name.
•
Once you have named a station preset, Press
DISPLAY
to show the name. When you want to return to the
frequency display, press
DISPLAY
several times to show
the frequency.
To Next Page
Loading...
