Listening to your system
5
5
27
33
4
2
Displaying the Fixed PCM Setting menu
The Fixed PCM Audio options are not displayed by default.
Perform the following operations to display them.
1
Switch the receiver into standby.
2
While holding down
RETURN
on the front panel, hold
Í
ON/STANDBY
.
The setting switches between display and hide each
time you operate these steps.
• If the
Standby Through
is not set to
OFF
, you may not be
able to set the switching of the
Fixed PCM
.
Changing the TV format setting of
Graphical User Interface
If the Graphical User Interface screen is not displayed
correctly, it may be that the TV system is set incorrectly for
your country or region.
1
Switch the receiver into standby.
2
While holding down
TUNING
on the front panel,
hold Í
ON/STANDBY
.
Each press switches between PAL and NTSC.
•
Default: PAL
•
The functions that can be set differ depending on the input signal or speaker settings.
DIRECT STEREO SURR DSP Using the headphones
Analog signal Other signals
Speaker Setting
Channel Level
Speaker Distance
Bass/Treble
Acoustic Calibration EQ
A/V SYNC
Advanced Music
Optimizer
DUAL MONO
Fixed PCM
LATE NIGHT
HDMI Audio
Auto Delay
Center Image
(
NEO:6 only)
To Next Page
Loading...
