GENERAL INFORMATION
RCR MODEL
22
MECHANICAL INFORMATION (continued)
ITEM SPECIFICATION
Frame Automated Robot-Formed and Welded Tubular and Plate Steel Construction
Fork Heavy-Duty EBR-Designed Non-Adjustable Motorcycle Fork with Steel Fork Brace
Fork Spring Stiness Heavy-Duty EBR-Designed Non-Adjustable Motorcycle Fork with Steel Fork Brace
Fork Suspension Travel 3” (80 mm)
Body Panel Material Formed Aluminum, Silver
Battery Cover Material Laminated Mahogany Plywood with Brown Stain
Headtube Length 5.7” (145mm)
Handlebar 7/8” DIA Tubular Steel 27.5” (700 mm) Wide
Handlebar Rise 2” (51 mm)
Dropout Width – Front 4.25” (108 mm)
Dropout Width – Rear 5.75” (150 mm)
Brake System Type – Front Single-Piston Hydraulic 220 mm DIA Hydraulic Disc Brake
Brake Operation – Front Right Hand
Front Brake Type Single-Piston Hydraulic 220 mm DIA Hydraulic Disc Brake with Braided Stainless Steel Brake Hose
Front Brake Rotor Disc Cross-Drilled Slots 220 mm DIA x 5 mm THK
Front Brake Fluid Type DOT-3
Front Brake Caliper Style ZUMA50 BWS YW50 Front Left
Front Brake Pad Type Material Semi-Metallic; Powerful Initial Bite with Long Life and Thermal Stability Up to 1100 °F
Front Brake Pad Style Yamaha Zuma 50 02-11, 49mm (61mm w/tabs) x 27mm x 4 mm THK
(NOTE: Replacement must match shape and conguration.)
Brake System Type – Rear Dual Piston Line-Pulled Hydraulic 205mm DIA 6-Bolt (Pitch Circle Diameter = 44 mm) Drilled Disc
Brake; Regenerative Braking Energy Recovery System
Brake Operation – Rear Left Hand
Rear Brake Type High-Strength Aluminum Alloy Material X-TECH HB-100 Dual Piston Line-Pulled Hydraulic Disc Brake
To Next Page
Loading...
Need help?
General
