EasyManuals Logo
Home>Onyx>Bicycle>RCR V2.0

Onyx RCR V2.0 User Manual

Onyx RCR V2.0
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
OPERATING CONTROLS
35
RIGHT SIDE CONTROLS
THROTTLE ON/OFF SWITCH (KILL SWITCH)
In total there are three ways to turn o the bike the only way to completely turn o the bike is to turn o the battery
or disconnect it from the bike. The kill switch allows the user to quickly turn o the bike by the push of a button on the
throttle. This does not deactivate the system like the unlock button does on the key-fob. Only use this button to tempo-
rarily turn o power to the throttle. Never store or transport the bike only using this button to kill the power.
HALF-TWIST THROTTLE
A half twist throttle is used to help save energy by encouraging you to rest your hand and coast. Warning: the throttle
is extremely sensitive.
DRIVE MODE SWITCH (3 MODES)
Each bike is outtted with a three speed function switch. This allows you to toggle through the software limited modes
of ECO / NORM / SPRT. Each mode can be adjusted to meet your needs via the soon-to-be-released mobile application.
To activate each mode eectively you should not be moving. Otherwise to work properly you must bring the bike’s
speed below the mode’s threshold. Toggle from left to right starting with ECO to get a feel for each mode. Note NORM
and SPRT mode are for o-road use only.
FRONT BRAKE MASTER CYLINDER AND LEVER
The brake control levers are mounted on the handlebar.
Right (2) lever controls the front wheel brake.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onyx RCR V2.0 and is the answer not in the manual?

Onyx RCR V2.0 Specifications

General IconGeneral
BrandOnyx
ModelRCR V2.0
CategoryBicycle
LanguageEnglish

Related product manuals