You can also set the SIM settings by expanding the menu for each SIM to set the
APN.
If no SIM is inserted you can still select a SIM slot. If you insert a SIM it will not
force it to become the active SIM.
Select The Primary SIM (Automatic Failover Mode)
Switching the primary SIM must be done manually. To switch the Primary SIM:
1. Navigate to CONFIGURE > NETWORKCONNECTIONS > Network Interfaces >
Cellular Interface (LTE.
2. Click the Editicon, this will display the MANAGE CELLULAR INTERFACE (LTE)
page and the current status of both SIM slots.
3. Ensure the cellular interface is enabled by clicking the Enabled button.
CONFIGURE MENU 68
To Next Page
Loading...
Need help?
General