Cellular Interface Policy Settings
MANAGE CELLULAR INTERFACE (LTE) Properties
Field Definition
CELLULAR SIM FAILOVER
-
Manual/Automatic.
Automatically switch between the Primary SIM
Card and the secondary SIM Card on dis-
connection.
Primary SIM Failover
Failover Probe Address. Network address to probe in order to determine if
connection is active.
Note:
The probe address accepts IPv4, IPv6
addresses and hostnames.
Test interval (seconds). The number of seconds between connectivity
probe tests.
Pings per test. The maximum number of times a single ping
packet is sent per probe before considering the
probe failed.
Consecutive test failures
before failover.
The number of times a probe must fail before the
connection is considered failed.
Failback Policy
Never / Delayed / On Dis-
connect.
Select the policy to be used to determine Failback
recovery from the Secondary SIM Card back to the
Primary SIM Card.
Never No Failback recovery is attempted.
Delayed Attempted failback after
n
minutes. The number of
minutes after failover to the secondary SIM Card
that the connection should failback to the Primary
SIM Card.
CONFIGURE MENU 74
To Next Page
Loading...
Need help?
General