Opengear OM1200 User Manual

Activate or Configure Automatic Failover
CONFIGURE > NETWORK CONNECTIONS> Network Interfaces > Cellular Inter-
face (LTE) > Manage Cellular Interface (LTE)
1.
Navigate to the Cellular Interface page at: CONFIGURE > NETWORK
CONNECTIONS> Network Interfaces > Cellular Interface (LTE).
2.
Click the Edit link next to the Cellular Interface Enabled/Disabled switch.
3.
In the Manage Cellular Interface page, select the Automatic failover option.
4.
Ensure the correct SIM card is selected as the Primary SIM (see 'Set Primary
SIM' in "Dual SIM" on page64).
5.
Complete the Cellular Interface options in accordance with the table below.
6.
Click Confirm to activate the failover policy settings, a green banner will con-
firm the settings are enabled.
CONFIGURE MENU 73

Opengear OM1200 Specifications

General

Brand	Opengear
Model	OM1200
Category	Network Hardware
Language	English