Opengear OM2200 Series User Manual

2. Enter the Server Address.
3. Enter the Protocol, either UDP or TCP.
4. Enter the correct Port. If no port is entered, UDP defaults to port 514 and TCP
defaults to 601.
5. Click Apply.
To edit an existing syslog server, click the Edit button under Actions. Delete a
server by clicking the Delete button or the checkbox next to multiple servers and
the Delete Selected button.
CONFIGURE MENU 105

Opengear OM2200 Series Specifications

General

Brand	Opengear
Model	OM2200 Series
Category	Switch
Language	English