Factory Reset
CONFIGURE > SYSTEM > Factory Reset
You can perform a factory reset, where logs and docker containers are preserved
and everything else is reset to the factory default.
To return the OPERATIONS MANAGER to its factory settings:
1. Select CONFIGURE > SYSTEM > Factory Reset.
2. Select the Proceed with the factory reset checkbox.
3. Click Reset.
Note: This performs the same operation as the hard factory erase button. This
resets the appliance to its factory default settings. Any modified configuration
information is erased. You will be prompted to log in and must enter the default
CONFIGURE MENU 131
To Next Page
Loading...
Need help?
General
