Opengear OM2200 Series User Manual

1. In the Configure > Services > Syslog tab click on the IP address of the target server.
The Edit Syslog Server tab is opened for editing.
2. You can delete a server by clicking the Delete button at the top right of the Edit tab
page.
Syslog Terminology
Syslog logging terminology used in setting Facility and Severity of the Syslog.
Create Syslog Server Tab - Field Definitions
Page location: Configure > Services > Syslog > Create Syslog Server
Field Definition
Description Unique, familiar text description or name given to this sys-
log server that users will recognize.
Server Address The IP address of the remote syslog server you are using
for logging.
Protocol Click to select the required protocol for data transmission
to the syslog server.
Port The Remote Syslog Server IP address.
Minimum Log Sever-
ity Level
Log entries with a value equal or greater than the level spe-
cified are sent to the remote server.
Send Serial Port
Logs
Click to enable serial port logging.
Create Button Click to initiate the remote syslog, wait for confirmation ban-
ner.
CONFIGURE MENU 108

Opengear OM2200 Series Specifications

General

Brand	Opengear
Model	OM2200 Series
Category	Switch
Language	English