· SNMP Message Type: The type of SNMP message to send to the SNMP man-
ager. The INFORM option will receive an acknowledgment from the SNMP man-
ager and will retransmit if required. The TRAP option does not expect
acknowledgments.
For SNMP V1 & V2C, you can specify a Community. This is a group name author-
ized to send traps by the SNMP manager configuration for SNMP versions 1 and
2c. This must match the information that is setup in the SNMP Manager. Examples
of commonly used values are log, execute, net and public.
CONFIGURE MENU 138
To Next Page
Loading...
Need help?
General
