Opengear OM2200 Series User Manual

7. Enter an Outer Local Address, a local IP address to use as the source
address of the tunnel
8. Enter an Outer Remote Address, the IP address or hostname of the remote
end of the tunnel.
9. Scroll down to the Traffic Selectors section of the page.
10. Enter a Local Subnet and Remote Subnet.
11. Scroll down to the third section, AUTHENTICATION.
CONFIGURE MENU 68

Opengear OM2200 Series Specifications

General

Brand	Opengear
Model	OM2200 Series
Category	Switch
Language	English