15
With T1 and T2 set to 0 sec : internal timings disabled, the lock can be
operated by means of external control systems by supplying or removing power.
The function of the magnetic door sensor is also disabled.
With T3 set to 0 sec : the alarm feature for prolonged opening is disabled.
To check the current timing: briefly press the concerned button.
T1 : deadbolt closure timing upon approach of the door.
T2 : deadbolt closure timing if the door is not opened.
T3 : timing of prolonged door opening alarm (only on versions
246-248-266-268).
BUTTONS
Button Range Minimum range Default setting
T1 0 to 5 sec. ±1 sec. 1 sec.
T2 0 to 60 sec. ± 5 sec. 5 sec.
T3 0 to 120 sec. ±10 sec. 10 sec.
PRIMA / PRIMA MAXI
PRIMA OP CLASSICA
To Next Page
Loading...
