Operation 121
Sure Sort™ Operator Manual
OPEX Corporation
Note: When powering up the system, the Sure Sort™ host computer will auto-
matically launch the OPEX Induct ELC software as part of the system’s start-up
routine. If you mistakenly closed the OPEX ELC software, or if the OPEX ELC
software did not start with the machine, you will get an error message.
However, you can start it manually:
If the OPEX ELC software is not already running, double-click on the OPEX
InductElc icon (Figure 4-14) on the desktop OR click
Start > All Programs >
OPEX > InductELC > OPEX InductElc
to open it.
Figure 4-14: OPEX Induct ELC icon
The moving parts of the Sure Sort™ can become jammed and/or damaged
by foreign objects. Make sure the conveyor and iBOT loading areas are clear
before you click
START
in the next step.
To Next Page
Loading...
