Operation 135
Sure Sort™ Operator Manual
OPEX Corporation
4.1.7. Clearing jams
From time-to-time, you will experience the inevitable jam. A “jam” refers to any
occurrence that causes the machine to stop, not necessarily because an item
is physically jammed in the machine. A jam can also refer to a lost iBOT.
Note: This section refers to many of the common, easily-fixed jams that may
occur from time-to-time when running the machine. If an iBOT has become
stuck in the machine (or is otherwise unusable) and needs to be removed,
inform your supervisor, or contact an Authorized Employee or OPEX
technician.
When a jam occurs, the Run screen will alert you as to where the jam has
taken place (see Figure 4-31).
Figure 4-31: Run screen Jam notification example
To Next Page
Loading...
