Opti-Sciences, Inc. CCM-200 plus operator's manual
12
Enter Comments for measurements
If desired, a comment can be entered for each measurement. It may also be entered only when
change is made, such as measuring location or sample type. The comment will only appear with
the specific measurement. However, because there is a time stamp in the data file, all
measurements below the comment line can be related to that comment.
To use the comment function follow the chart below. Alpha-Numeric characters may be entered
using the vertical blue arrows below the screen. The horizontal arrows move the black cursor left
and right. Comments of up to 20 characters may be entered. When done, press Enter. Back out to
the measuring screen and continue measuring.
See the next page for a screen by screen diagram of how to enter comments.
Comments are entered by pressing Info on measuring screens.
To Next Page
Loading...
