Opticon ESL Server User Manual

Opticon ESL
ESL Server manual
v1.0.62.2
46
7.2.1.6 Base station Status table
When using SQL, the ESL server automatically creates a table called ‘basestationstatus’. This
table is used to store all information about each base station in the server application and has the
following table design
MAC
12-digit hexadecimal MAC address of the base station
IP_ADDRESS
Current IP address of the base station
PORT
Current IP port number of the base station
MODEL
Current hardware model of the base station
(EBS30/EBS31/EBS40)
NAME
Current local name f the base station
PAN_ID
Current PAN-Id on which this base station operates
CHANNEL
Current RF-channel on which this base station operates
VERSION
Firmware version of the base station
STATUS
Current connection status (Connected or Disconnected)
ESLS
Current number of associated ESLs to this base station
MIN_LOAD
RFU (for load balancing)
MAX_LOAD
RFU (for load balancing)
LAN_ID
LANID = 0000 (default) means all ESL will associate with this base
station. LANID <> 0000 means only ESLs with the same LANID or
with LANID=0 will associate with this base stations
7.2.1.7 Logging table
When using SQL, the ESL server automatically creates a table called ‘esllog. This table is used to
store all alerts and events, except user activity. This table has the following table design

Opticon ESL Server Specifications

General

Brand	Opticon
Model	ESL Server
Category	Wireless Router
Language	English