Opticon NLV-5201 - LED Indicator Specifications

NLV-5201 Specifications Manual
8
5.4 LED Indicator Specifications
The status LED’s indicate the read result and USB communication status. In read rate mode,
the reading success rate is indicated by these three 3-color LED’s.
Normal Mode Status LED Indication
Status
Reading Success
Waiting for USB
Communication
Communication/
Reading Error
LED Indication
“Test mode”, “Tune mode” and “Aim mode” LED Indication
Test and tuning display the read rate 10 times.
Read Rate
0 - 40 %
50 - 70 %
80 - 90%
100%
Central Coordinate
Far from the
center
⇨
Close to the
center
LED Indication
“Saved Settings Bank No.” LED Indication
The number of the currently used saved settings bank blinks when you press the mode key for
more than 2 seconds. Values (from 1 to 7) are in binary.
Bank No.
No. 1
No. 2
No. 3
No. 4
No. 5
No. 6
No. 7
LED Indication