6 Other Bluetooth companion scanner applications
Besides this Bluetooth application there are 3 other applications available on our website that might fit your specific
use case better.
6.1 Software V3727x: OPN-2001 simulation application
This application turns the Bluetooth companion scanner into an OPN-2001 compatible batch scanner.
Besides USB, any stored barcode data can also be retrieved from the barcode scanner by using Bluetooth.
Use this application in combination with the OPN-2001 application for Windows (or develop your own application
using the SDK that's available for the OPN-2001).
Note: When planning to use the OPN-2005/6 solely as a standard OPN-2001, without Bluetooth or the need to run
other applications, please note the following (hardware) differences:
• The OPN-2005/6 does not support laser aiming (laser dot)
• The OPN-2005/6 cannot change its scan angle to shorten the laser line
• Not all supported 2D symbologies of the PX-20 and the RS-3000 can be configured using the OPN-2001
application. Use the Universal menu book or http://opticonfigure.opticon.com/ instead.
6.2 Software V3793x: Batch application
This software turns the Bluetooth companion scanner into a batch scanner that can transmit its saved data as a file.
Use this application in combination with the OseComm or NetO32 Windows application.
This embedded application also makes it possible to use the Bluetooth companion scanner as USB Mass Storage
device, which stores all bar codes in a file that can be retrieved with any file explorer on any platform supporting
USB Mass Storage.
The output format of the barcode file (comma separated) can be configured using the setup chart that can be found
in the included user guide.
To Next Page
Loading...
Need help?
General
