Optima Scale 909 - Noise Filter (C29); Print Time and Date (C30); Analog Output Setting (C31); Calibrate Current (C32)

Function Parameter Settings/Options
0 = turn off noise filter
1 = 1 digital filter strength
2 = 2 digital filter strength
3 = 3 digital filter strength
0
1
2
3
=
=
=
=
yy.mm.dd
mm.dd.yy
dd.mm.yy
yy.mm.dd
0 =
1 =
0 - 5V output
4 - 20mA output
4 - 20mA current
0 = turn off relay output
1 = turn on relay output function 1
2 = turn on relay output function 2
3 = Reserved menu
9.7000 - 9.9999
9.7000 - 9.9999
0 =
1 =
2 =
auto mode
gross mode
tare mode
0 - 9 (How much space between print outs)
0 - 9 (Where the data prints on the paper: 0 = left ; 9 = right)
0
1
=
=
do not print the date
print date the date
0
1
=
=
do not print the time
print the time
Noise Filter
Print Time and Date
Analog Output Setting
Calibrate Current
Relay Output Setting
Gravity of Calibration
Location
Gravity of Destination
Version No.
Print Mode
Print Carriage Return
Space Print
Date Print
Time Print
Baud Rate for
2nd RS232
C29
C30
C31
C32
C33
C36
C37
C38
C41
C42
C43
C44
C45
C48
0 = 1200 (for remote display)
1 = 2400
2 = 4800
3 = 9600
Table 2. Unit Conversion Parameter Settings
Parameter Settings Units Available
C01 = 1
C12 = 1
kg
lb
- 13 -