2.3 in
7.8 in
2.3 in
5.5 in
SPECIFICATIONS
POWER SUPPLY
8.2 in
8.3 in
INDICATOR MEASUREMENTS
- 3 -
AC Adapter
If the indicator is powered by an adapter, plug the adapter directly into the “DC” pin located at
the bottom of the indicator. We recommend to plug into a wall outlet to avoid interference with
other wirings.
Battery
If you have an indicator with the rechargeable battery option, please charge the internal battery
fully before first time use. A 110 to 220V AC adapter should be provided with your indicator. Please
use only the AC adapter provided to prevent damage to your indicator. To keep the battery in best
condition, fully discharge the battery every month by leaving the indicator on until the indicator
powers off, and then recharge fully. If the battery is not going to be used for a long period of time
it is recommended to remove it to avoid leakage.
To Next Page
Loading...