What to do if my Optima Scale OP-901 shows UUUUUU?
If your Optima Scale Accessories display shows 'UUUUUU', it could be due to several reasons: * The scale might be overloaded. In this case, reduce the weight on the scale. * There might be a wrong connection with the load cell. Check the load cell connection. * The load cell itself might have a quality problem. Inspect the load cell and check its input/output.
What to do if Optima Scale OP-901 Accessories displays ERR3?
If your Optima Scale Accessories displays 'ERR3', you should: 1. Check all wire connections. 2. Check the load cell. 3. Recalibrate the scale. 4. If the previous steps fail, a PCB replacement may be needed.
What to do if my Optima Scale OP-901 shows nnnnnnn?
If your Optima Scale Accessories displays 'nnnnnnn', the following could be the reasons: * The calibration might be incorrect. Ensure the scale is level. * There might be a wrong connection with the load cell. Check the load cell connection. * The load cell might have a quality problem. Check the load cell input and output resistance.
What to do if Optima Scale OP-901 Accessories displays ERR1?
If your Optima Scale Accessories displays 'ERR1', use the correct weight within the defined range.
What to do if Optima Scale Accessories displays ERR2?
If your Optima Scale Accessories displays 'ERR2', the calibration weight minimum is 10% of the maximum capacity set in C04. It's recommended to use 60%-80% of the maximum capacity if possible.
What to do if Optima Scale OP-901 Accessories displays ERR4?
If your Optima Scale Accessories displays 'ERR4', start calibration after the platform is stable.
What to do if Optima Scale Accessories displays ERR5?
If your Optima Scale Accessories displays 'ERR5', you should change the PCB.
Measures to discharge static charge on the human body before handling sensitive equipment.
Lists key operational capabilities like weighing units, hold functions, and overload indication.
Details specifications such as accuracy, load capacity, interface, and operating conditions.
Instructions for using the AC adapter for charging the indicator.
Guidance on charging, discharging, and maintaining the rechargeable battery.
Procedure for turning the weighing indicator on and its initial auto-check sequence.
How to use the zero function for accurate weight measurement and its limitations.
Steps to switch between different weighing units like kg, lb, and oz.
How to use the tare function to exclude container weight and get net weight.
Grabs and displays the highest weight recorded, useful for tension or pulling force.
Holds the current weight value, preventing fluctuations until HOLD is pressed again.
Automatically holds stable weight for 3 seconds, then returns to general weighing.
Calculates and displays the average weight sampled over 3 or 5 seconds for animal weighing.
Automatically calculates average weight over 3 seconds without needing the HOLD key.
General| Brand | Optima Scale |
|---|---|
| Model | OP-901 SERIES |
| Category | Accessories |
| Language | English |
To Next Page
