17
OPERATION
You can use the recorder to play normal bias, high-
bias, and metal tapes. However, you should only use
normal bias (Type I) tapes for recording. If you record
on metal or high-bias tapes, the recorded sound will
not erase properly.
LOADING A CASSETTE TAPE
1. Take up any slack in the tape by turning the cas-
sette’s hub with a pencil. Do not touch the
exposed tape.
2. Lift open the cassette compartment door.
14-1120.fm Page 17 Wednesday, January 19, 2000 4:27 PM
To Next Page
Loading...
