29
TAPE TIPS
Erasing Tapes
If you record on a previously recorded tape, you re-
place the old recording with the new one. If you need
to quickly erase an entire tape, you might prefer to
use a bulk eraser (available at your local RadioShack
store).
Note
: If you use metal or high-bias type tape, the re-
corded sound may not be erased properly.
Preventing Accidental Erasure
Cassettes have two erase-protection tabs — one for
each side. When a tab is in place, you can record on
that side.
To prevent accidental erasure of a tape recording,
use a screwdriver to remove one or both of the cas-
sette tape’s erase-protection tabs. This prevents
RECORD
from being pressed.
Side A
Side A Tab
14-1120.fm Page 29 Wednesday, January 19, 2000 4:27 PM
To Next Page
Loading...
