Optium Xceed User Manual

5
Check that the LOT number
or calibration CODE on all
these items matches:
✓ Display window
✓ Electrode calibrator
✓ Electrode instructions for use
✓ Electrode foil packet
When the LOT number or
calibration CODE on all
these items matches:
What It Means:
Calibration is complete.
What to Do:
You may now monitor
your blood glucose or
blood ß-Ketone.
When the LOT number or
calibration CODE on all these
items DOES NOT match:
What It Means:
Your monitor may not be
calibrated for the box of
electrodes you are using.
What to Do:
•Check that you are using the
calibrator that came in the box
of electrodes you are using.
•Try to calibrate again.
Calibrating
Your Monitor
26
133-221 Manual,G3b,Aus 3/17/05 11:15 AM Page 29

Optium Xceed Specifications

General

Sample Size	0.6 microliters
Test Time	5 seconds
Battery Life	Approximately 1000 tests
Blood Sample	Capillary whole blood
Memory Capacity	450 results
Operating Temperature	10°C to 40°C
Operating Humidity	10% to 90% RH
Power Source	2 x AAA batteries