Optoma EP739 - Page 16

16
English ...
User Controls
Using the Remote Control
Power/Standby
4
Refer to the “Power On/Off the Projector” section on pages
11-12.
Re-Sync
4
Automatically synchronizes the projector to the input source.
Volume + / - (Vol+/Vol-)
4
Increases/decreases speaker volume.
Reset
4
Changes the adjustments and settings to the factory default
value.
Hide
4
Press “Hide” to hide image, press again to restore display of the
image.
Keystone /
4
Adjusts image distortion caused by tilting the projector (±16
degrees).
Page Up (Computer mode only)
4
Use this button to page up. This function is only available
when the projector is connected to a computer via an USB cable.
Page Down (Computer mode only)
4
Use this button to page down. This function is only available
when the projector is connected to a computer via an USB cable.
Freeze
4
Press “Freeze” to pause the screen image.
Four Directional Select Keys
4
Use to select items or make adjustments to
your selection.
Menu
4
Press “Menu” to launch the on screen display menu. To exit
OSD, press “Menu” again.
Enter
4
Confirm your selection of items.
VGA
4
Press “VGA” to choose Analog RGB, component and HDTV
source.
S-Video
4
Press “S-Video” to choose S-Video source.