Optoma EP761 - Change Password

37
English
User Controls
Setup | Security
■ First Time:
1. The Password is 4 digits, DEFAULT VALUE is “0000”.
(rst time)
2. Use number buttons on the remote to select your password,
and then press “ ” key to conrm your selection.
Change Password
1. Press “ ” to input old password.
2. Use number button to enter current password,
and then press “ ” key again to reveal next OSD
menu.
3. Scroll down to highlight Password, and then press
“ ” to activate.
4. Enter new password (4 digits in length) using the
number buttons on the remote, then press “ ” to
conrm.
5. Enter new password again and press “
” to
conrm.