Optoma GT2000HDR User Manual

English
32
USING THE PROJECTOR
Image 3D menu
Note:
• This projector is a 3D ready projector with DLP-Link 3D solution.
• Please ensure that 3D glasses are in use for DLP-Link 3D content before enjoying your video.
• This projector supports frame sequential (page-ip) 3D via HDMI1/HDMI2 ports.
• To enable 3D mode, the input frame rate should be set to 60Hz only, lower or higher frame rate is not
supported.
• To reach the best performance, resolution 1920x1080 is recommended, please note that 4K (3840x2160)
resolution is not supported in 3D mode.
3D Mode
Use this option to disable or enable the 3D function.
• O󰀨: Select “O󰀨” to turn o󰀨 3D mode.
• On: Select “On” to turn on 3D mode.
3D Sync Type
Use this option to select 3D technology.
• DLP-Link: Select to use optimized settings for DLP 3D Glasses.
• 3D Sync: Select to use optimized settings for IR, RF or polarized 3D Glasses.
3D-2D Conversion
Use this option to specify how the 3D content should appear on the screen.
• 3D: Display 3D signal.
• L: Display the left frame of 3D content.
• R: Display the right frame of 3D content.
3D Format
Use this option to select the appropriate 3D format content.
• Auto: When a 3D identication signal is detected, the 3D format is selected automatically.
• Side by Side: Display 3D signal in “Side-by-Side” format.
• Top and Bottom: Display 3D signal in “Top and Bottom” format.
• Frame Sequential: Display 3D signal in “Frame Sequential” format.
• Frame Packing: Display 3D signal in “Frame Packing” format.
3D Sync Invert
Use this option to enable/disable the 3D sync invert function.
Reset
Return the factory default setting for 3D settings.
• No: Select to cancel Reset.
• Yes: Select to return the factory default settings for 3D.
Image reset menu
Return the factory default settings for image settings.

Optoma GT2000HDR Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	16:9
Projection distance	0.3 - 3.3 m
Vertical scan range	24 - 120 Hz
Horizontal scan range	15 - 140 kHz
Projection technology	DLP
Supported aspect ratios	4:3, 16:10, 16:9
Contrast ratio (typical)	300000:1
Digital gamma correction	Yes
Screen size compatibility	30 - 300 \
Projector native resolution	1080p (1920x1080)
Keystone correction, horizontal	-30 - 30 °
Light source type	Laser
Service life of light source	30000 h
Focus	-
Offset	116 %
Throw ratio	0.496:1
Focal length range	7.51 mm
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Analog signal format system	NTSC J, NTSC M, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, SECAM B, SECAM D, SECAM G, SECAM K, SECAM K1, SECAM L
Supported graphics resolutions	640 x 480 (VGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1360 x 768 (WXGA), 1920 x 1080 (HD 1080)
HDMI connector type	Full-size
Serial interface type	RS-232
USB 2.0 ports quantity	1
VGA (D-Sub) ports quantity	0
Noise level	32 dB
Number of OSD languages	25
On Screen Display (OSD) languages	ARA, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, FAS, FIN, FRE, GRE, HUN, IND, ITA, JPN, NOR, POL, POR, RUM, RUS, SWE, TUR, VIE
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG)
RMS rated power	15 W
Placement	Ceiling, Desktop, Wall
Product type	Short throw projector
Product color	White
Market positioning	Home cinema
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100-240 V
AC input frequency	50-60 Hz
Power consumption (max)	139 W
Power consumption (standby)	0.5 W
Power consumption (typical)	98 W
Operating altitude	0 - 2500 m
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 80 %

Weight and Dimensions

Depth	216 mm
Width	274 mm
Height	114 mm
Weight	3000 g
Package weight	4200 g