Optoma GT2000HDR User Manual

English
33
USING THE PROJECTOR
Display menu
Display projection orientation menu
Select the preferred projection between front, rear, ceiling-top, and rear-top.
Display light source mode menu
Select a light source mode depending on the installation requirements.
Display dynamic black menu
Use to automatically adjust the picture brightness in order to give optimum contrast performance.
Display gaming mode menu
Enable this feature to reduce response times (input latency) during gaming to 8.6ms (1080p@120Hz). All geometry
settings (example: Keystone, Four Corners) will be disabled when Gaming Mode is enabled. For more information
is below.
Note:
• The input lag by signals is described in the following table:
• The values in the table can vary slightly.
Source Timing Gaming Mode Output Timing Output Resolution Input Lag
1080p60 On 1080p60Hz 1080p 17ms
1080p120 On 1080p120Hz 1080p 8.6ms*
4K60 On 1080p60Hz 1080p 17ms*
1080p60 O󰀨 1080p60Hz 1080p 33.8ms
1080p120 O󰀨 1080p120Hz 1080p 17ms*
4K60 O󰀨 1080p60Hz 1080p 33.7ms*
• 1080p120 and 4K60 only support 1080p model.
• *Only supported in 1080p Short Throw w/o network,1080p 1.3x, 1080p Short Throw model, and
1080p 1.6x models.
Display screen type menu
Choose the screen type from 4:3, 16:9, and 16:10.

Optoma GT2000HDR Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	16:9
Projection distance	0.3 - 3.3 m
Vertical scan range	24 - 120 Hz
Horizontal scan range	15 - 140 kHz
Projection technology	DLP
Supported aspect ratios	4:3, 16:10, 16:9
Contrast ratio (typical)	300000:1
Digital gamma correction	Yes
Screen size compatibility	30 - 300 \
Projector native resolution	1080p (1920x1080)
Keystone correction, horizontal	-30 - 30 °
Light source type	Laser
Service life of light source	30000 h
Focus	-
Offset	116 %
Throw ratio	0.496:1
Focal length range	7.51 mm
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Analog signal format system	NTSC J, NTSC M, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, SECAM B, SECAM D, SECAM G, SECAM K, SECAM K1, SECAM L
Supported graphics resolutions	640 x 480 (VGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1360 x 768 (WXGA), 1920 x 1080 (HD 1080)
HDMI connector type	Full-size
Serial interface type	RS-232
USB 2.0 ports quantity	1
VGA (D-Sub) ports quantity	0
Noise level	32 dB
Number of OSD languages	25
On Screen Display (OSD) languages	ARA, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, FAS, FIN, FRE, GRE, HUN, IND, ITA, JPN, NOR, POL, POR, RUM, RUS, SWE, TUR, VIE
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG)
RMS rated power	15 W
Placement	Ceiling, Desktop, Wall
Product type	Short throw projector
Product color	White
Market positioning	Home cinema
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100-240 V
AC input frequency	50-60 Hz
Power consumption (max)	139 W
Power consumption (standby)	0.5 W
Power consumption (typical)	98 W
Operating altitude	0 - 2500 m
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 80 %

Weight and Dimensions

Depth	216 mm
Width	274 mm
Height	114 mm
Weight	3000 g
Package weight	4200 g