Optoma GT2000HDR User Manual

English
39
USING THE PROJECTOR
Setup power settings menu
Direct Power On
Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied,
without pressing the “Power” key on the projector keypad or on the remote control.
Signal Power On
Choose “On” to activate Signal Power mode. The projector will automatically power on when a signal is detected,
without pressing the “Power” key on the projector Keypad or on the remote control.
Note:
• If the “Signal Power On” option is turned “On”, the power consumption of the projector in standby
mode will be over 3W.
• This function is applicable with HDMI source.
Auto Power O󰀨 (min.)
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power o󰀨 when the countdown has nished (in minutes).
Sleep Timer (min.)
Sets the countdown timer interval. The countdown timer will start, with or without a signal being sent to the
projector. The projector will automatically power o󰀨 when the countdown has nished (in minutes).
Note: The Sleep Timer is reset every time when the projector is powered o.
Power Mode (Standby)
Set the power mode setting.
• Active: Choose “Active” to return to normal standby.
• Eco: Choose “Eco.” to save power dissipation further < 0.5W.
Note: Power Mode (Standby) is available only in models that support the network function, such as XGA, WXGA,
1080p 1.3x, 1080p Short Throw model, and 1080p 1.6x.
Setup security menu
Security
Enable this function to prompt for a password before using the projector.
• On: Choose “On” to use security verication when the turning on the projector.
• O󰀨: Choose “O󰀨” to be able to switch on the projector without password verication.
Note: The default password is 1234.
Security Timer
Select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this time has
elapsed you will be requested to enter your password again.
Change Password
Use to set or modify the password that is prompted when turning the projector on.
Setup keypad settings menu
Keypad Lock
When the keypad lock function is “On”, the Keypad will be locked. However, the projector can be operated by the
remote control. By selecting “O󰀨”, you will be able to reuse the Keypad.

Optoma GT2000HDR Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	16:9
Projection distance	0.3 - 3.3 m
Vertical scan range	24 - 120 Hz
Horizontal scan range	15 - 140 kHz
Projection technology	DLP
Supported aspect ratios	4:3, 16:10, 16:9
Contrast ratio (typical)	300000:1
Digital gamma correction	Yes
Screen size compatibility	30 - 300 \
Projector native resolution	1080p (1920x1080)
Keystone correction, horizontal	-30 - 30 °
Light source type	Laser
Service life of light source	30000 h
Focus	-
Offset	116 %
Throw ratio	0.496:1
Focal length range	7.51 mm
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Analog signal format system	NTSC J, NTSC M, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, SECAM B, SECAM D, SECAM G, SECAM K, SECAM K1, SECAM L
Supported graphics resolutions	640 x 480 (VGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1360 x 768 (WXGA), 1920 x 1080 (HD 1080)
HDMI connector type	Full-size
Serial interface type	RS-232
USB 2.0 ports quantity	1
VGA (D-Sub) ports quantity	0
Noise level	32 dB
Number of OSD languages	25
On Screen Display (OSD) languages	ARA, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, FAS, FIN, FRE, GRE, HUN, IND, ITA, JPN, NOR, POL, POR, RUM, RUS, SWE, TUR, VIE
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG)
RMS rated power	15 W
Placement	Ceiling, Desktop, Wall
Product type	Short throw projector
Product color	White
Market positioning	Home cinema
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100-240 V
AC input frequency	50-60 Hz
Power consumption (max)	139 W
Power consumption (standby)	0.5 W
Power consumption (typical)	98 W
Operating altitude	0 - 2500 m
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 80 %

Weight and Dimensions

Depth	216 mm
Width	274 mm
Height	114 mm
Weight	3000 g
Package weight	4200 g