English
44
USING THE PROJECTOR
How to use web browser to control your projector
1. Turn “On” the DHCP option on projector to allow a DHCP server to automatically assign an IP address.
2. Open the web browser in your PC and type in the projector’s IP address
(“Control > LAN > IP Address”).
3. Enter the user name and password, and click “Login”.
The projector’s conguration web interface opens.
Note:
• The default user name and password is “admin”.
• The steps in this section is based on Windows 10 operating system.
Making a direct connection from your computer to the projector*
1. Turn “O” the DHCP option on the projector.
2. Congure the IP address, Subnet Mask, Gateway, and DNS on projector (“Control > LAN”).
3. Open Network & Internet page on your PC, and assign the identical network parameters to your PC
as set on projector. Click “OK” to save the parameters.
4. Open the web browser on your PC and type in to the URL eld the IP address, assigned in step 3.
Then press “Enter” key.
Reset
Reset the network settings to default factory values.
How to use web browser to control
your projector