Optoma HD25e - Main Board

HD25/HD25LV/HD25e
Condential 2-3
4. Unscrew 2 screw (as blue circle) from
the IO Cover.
5. Unscrew 8 hex screws (as green circle)
from the IO Cover.
note:For HD25e only need to unscrew 4
hex screws (as green circle) from the
IO Cover.
6. Unplug 1 connector (as orange square).
7. Disassemble the Main Board
.
Note: - Make sure cables plug into the
correct ports when assembling the
unit.
Main Board
HD25e
HD25/HD25LV