Optoma HD33 - IMAGE Settings; Display Mode and Image Presets

English
25
User Controls
IMAGE
Display Mode
There are many factory presets optimized for various types of
images.
Cinema: For home theater. `
Reference: This mode is intended to reproduce, as close `
as possible, the image the way the movie director intended.
Color, color temperature, brightness, contrast and gamma set-
tings are all congured to standard reference levels. PureEn-
gine Image processing is disabled.
Photo: Optimized for displaying photographic images. `
Bright: Maximum brightness from PC input. `
3D: Recommended setting for 3D mode enabled. Any further `
adjustments by the user in 3D will be saved in this mode for
further use.
ISF Day: Optimize the image with the ISF Day mode to be `
perfectly calibrated and high picture quality.
ISF Night: Optimize the image with the ISF Night mode to be `
perfectly calibrated and high picture quality.
User: User’s settings. `
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
NOTE
“ISF Day” and 
“ISF Night” will
not be shown
when the ISF
modes have not
been calibrated.