DISPLAY | 3D
3D Mode
DLP Link: Select “DLP Link” to use optimized settings for DLP `
Link 3D Glasses. (please refer to page 15).
VESA 3D: Select “VESA 3D” to use optimized setting for VESA `
3D Glasses. (please refer to page 13).
3D -> 2D
3D: Display 3D signal. `
L (Left): Display the left frame of 3D content. `
R (Right): Display the right frame of 3D content. `
3D Format
Off: Press the “Off” to disable 3D format conversion. `
SBS: Display 3D signal in “Side-by-Side” format. `
Top and Bottom: Display 3D signal in “Top and Bottom” format. `
Frame Sequential: Display 3D signal in “Frame Sequential” `
format.
“3D Format” is
only supported on
non-HDMI 1.4a
3D timing.
Press “Enter” to
select 3D format.
To Next Page
Loading...
