12
4. Turn the Optoma NuForce BE Live5 to “Pairing Mode”
5. When the Optoma NuForce BE Live5 is discovered by your Mac
click on “Pair”
6. Your Mac is now ready to play audio via the BE Live5
MISCELLANEOUS
Multipoint Connections
If you have stored pairing information for multiple devices and more
than one of those devices have Bluetooth enabled at the same time,
your BE Live5 will enable multipoint connection.
Multipoint connection allows your BE Live5 to hold connections with two
devices at the same time while playing audio signal from only one of the
two devices.
Multipoint connection works in the following ways:
• Your BE Live5 automatically connects with the most recently paired
device (“Primary device”).
• You must manually connect the second device (“Secondary device”) to
your BE Live5 via its operating system.
To Next Page
Loading...
