Optoma NuForce Bluetooth BE Live5 User Manual

5
The BASICS
Charging Your BE Live5
Although your BE Live5 in-ear headphones come with a partially charged
battery, it is recommended that you fully charge your BE Live5 before
first use.
1. Open the charge port cover on the in line controller.
2. The charge cable should be connected to the charge port and
either to a PC or a dedicated USB charger.
3. When charging, the LED indicator is red.
4. LED Indicator turns blue once charging is complete.
NOTE: It takes up to 1.5 hours to fully charge the BE Live5.
Checking Battery Level
1
2
3
4

Optoma NuForce Bluetooth BE Live5 Specifications

Connectivity

connection type	Bluetooth 2.4Ghz
Bluetooth type	V4.1
Bluetooth profile	HSP 1.2, HFP 1.6, A2DP 1.2, AVRCP 1.4
A2DP Codec	SBC, Qualcomm® aptX™ audio, AAC

Audio

driver type	Dynamic
driver size	8 mm
impedance	16 Ohm
frequency response	20Hz - 20kHz
sensitivity	99dB +/-3dB at 1KHz

Battery

battery life	Up to 8 hours
battery type	Lithium-ion battery, Cylindrical Type, Typical 3.7V/55mAh x2 pcs
power consumption	15mA at A2DP mode

Operating Environment

microphone sensitivity	-42 +/-3 dB
operation temperature	0-45 degrees Celsius

Weight and Dimensions

cable length	580 +/- 20 mm
weight	16 Grams
range	Up to 10m