8
Otherwise, pushing the Power/Function button for more than 3
seconds from a powered-on state turns the BE Live5 off.
B. If left inactive in pairing mode, your BE Live5 will automatically
power off after 3 minutes.
C. Your BE Live5 can store pairing information for up to eight
devices.
To pair additional devices to your BE Live5 ensure that your BE
Live5 is not concurrently connected to any device, then repeat the
steps 1,2,3 outlined above.
In case where your BE Live5 have already stored pairing
information for eight devices and a ninth device is paired, the
stored information for the very first device will be deleted.
Power On/Power Off
To power on your BE Live5, press Power/Function button for about 2
seconds until the LED indicator flashes blue and you hear the “Power on”
when voice prompt is activated or a beep if the voice prompt is not used.
NOTE:
Once you have successfully paired the BE Live5 to a Bluetooth-enabled
device, the BE Live5 will automatically connect with that device once it is
powered on again. For more information check “Bluetooth Pairing”
section.
If you have stored pairing information for multiple devices and more than
one of those devices is Bluetooth enabled, the BE Live5 will automatically
connect with the most recently paired device and will also enable
multipoint connection.
To Next Page
Loading...
Need help?
Connectivity
Audio
Battery
Weight and Dimensions
