boot sequence and loads the configured software file.
Alarm LED
The alarm LED on the front control panel indicates if any alarms are active on the
Acme Packet 6300/6350. The LED can be three different colors to indicate the severity
of the alarms.
• Unlit- system is fully functional without any faults
• Amber- major alarm has been generated
• Red- critical alarm has been generated.
Power LED
The green power LED indicates the power is on.
Alarm Silence Button
The alarm silence button clears the alarm table internally and opens the alarm circuits
connected to the network interface unit’s alarm port.
Graphic Display
The graphic display is a four-line VFD display window on the Acme Packet
6300/6350 front control panel that reports real-time status, alarms, and general system
information.
Navigation Buttons
You use the navigation buttons to navigate through the menus and information visible
on the graphic display.
Intake Fans
Fifteen individual intake fans keep the Acme Packet 6300/6350 cool by pulling air
through the front panel and exhausting heated air through the rear of the chassis. The
fans are covered by a particle filter that prevents excess dust and contaminants from
entering the system.
Chapter 2
System Control Panels
2-4
To Next Page
Loading...
Need help?
General
