Do you have a question about the Oracle Acme Packet 6300 and is the answer not in the manual?
Model | Acme Packet 6300 |
---|---|
Category | Session Border Controller |
Power Supply | Dual AC or DC |
Operating Temperature | 32° to 104°F (0° to 40°C) |
Storage Temperature | -4° to 158°F (-20° to 70°C) |
Humidity | 5% to 95% non-condensing |
Interfaces | Ethernet |
Redundancy | Power supplies |
Form Factor | 1U rack-mountable |
Storage | Internal SSD |
Memory | 16 GB RAM |
Ports | 8 x 10/100/1000 Ethernet |
General safety guidelines for system operation and handling.
Precautions to protect against electrical hazards during installation and operation.
Warning regarding the risk of explosion when replacing batteries incorrectly.
Procedures to protect equipment from damage caused by electrostatic discharge.
Information on applicable environmental, safety, and regulatory certifications.
Details about the system chassis, rack mounting hardware, and installation components.
Describes the front panel components including display, buttons, LEDs, and fans.
Details rear panel features like ports, slots, power supplies, and cooling elements.
Covers option card slots, USB, console, alarm, and network management ports.
Information on AC/DC power supplies, redundancy, and power cords.
Details on fans, air filters, and ventilation for system operation.
Instructions on how to navigate and use the front panel graphic display.
Explains the different display modes (Base and Alarm) of the graphic display.
Details on accessing system information through various menus on the graphic display.
Describes the HA state indications displayed on the graphic display for HA nodes.
Covers shipped parts, tools, recommendations, rack instructions, pre-installation, and safety guidelines.
Procedures for installing the chassis in 4-post and 2-post equipment racks.
Covers grounding, power cable installation, and various system cabling procedures.
Steps and prerequisites for establishing a console connection to the system.
Procedures for powering on the system and performing the initial login.
Instructions for formatting the Solid State Drive after system installation.
Procedures for shutting down, rebooting, resetting, and power cycling the system.
Guides for removing and replacing key components like power supplies, NIUs, and SSDs.
Instructions for maintaining fans, filters, and cleaning cooling components.
Covers SFP+ removal/replacement and details on system alarms.
Information on applicable environmental, safety, and regulatory certifications.
Details the physical dimensions and weight of the system chassis and power supplies.
Information on power supply fuse requirements and alarm port current limits.
Guidelines for operating temperature, humidity, altitude, and airflow.
Details on connector types and optical transceiver specifications.
An alphabetical list of acronyms, definitions, and terms used in the document.